StarterKits

With the Starter kit you can easily get started with Piezo LEGS®. With the free PiezoMotor DriveLab application, you can run the motor in closed loop and with controlled position from a built-in encoder.

The Starter kit is delivered with a PMD401 controller and a linear or rotary motor (LL06, LT20, LT40, LR17 or LR23). It’s a fully featured miniature connector board for open loop and closed loop operation that can be easily stacked to form a multi-axis controller system.

It can be connected to the customer’s mainboard for integration in OEM applications. The PMD401 provides a resolution of up to 8192 microsteps, which means a positioning resolution in the sub-nanometer range. Host communication is done via 2-wire RS485 through ASCII commands.

The Starter kit is delivered with power supply for all regions and a USB (RS85) connection to a Windows computer running DriveLab. Download Piezo DriveLab from the PiezoMotor official website. Note that each motor will have a specific maximum speed and step length, depending on the controller.

When ordering a Starter Kit make sure to order the following:

  • Starter-PMD401 (includes PMD401 driver, PMD401 connector board, power supply, USB-RS485 cable for connection to PC)
  • Motor (see more details below)
  • Motor cable (needed for all motors except LR23 with encoder)
  • Encoder cable (for motors with encoder)

Download StarterKit information

Prices for each StarterKit model, in Euro

LL06 (without encoder and guiding)831€
LL06 (with 1,25µm encoder)1002€
LT20 (no encoder option)975€
LT40 (no encoder option)1551€
LR17 (with encoder)975€
LR23-80 (with encoder)975€
LR23-80 (without encoder)819€
NOTE: When ordering an LL06, LT20, LT40 you must select drive rod length. The drive rod length decides the stroke. See detail for each motor under the product description. Replace XXX with 040 for a 40mm drive rod
katalog2